Based on the free area in a convenient location, it was decided to build a 5 by 10 meter greenhouse with an east-west orientation.
The walls were built from a material with high thermal conductivity on cement-sand mortar.
After the formation of the walls, the installation of the roof began. It is based on the central timber, which rests in the center of the greenhouse on the installed square tube and the strapping timber, which was fixed to the wall with threaded rods and nuts. Then rafters were attached to these bars.
On the rafters installed transverse slats. Thus was created a frame for polycarbonate.
All wooden surfaces were carefully treated with antiseptic.
The greenhouse is covered with a double layer of polycarbonate
So made the entrance to the greenhouse.