Author Topic: Small diameter scion Bark Flap Citrus graft  (Read 3746 times)

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Small diameter scion Bark Flap Citrus graft
« on: June 29, 2019, 07:53:00 AM »
Photos of a simple graft for joining a small diameter scion with a range of similar or larger diameter actively growing rootstocks. These have worked very well for me in the past.

Selected Poncirus rootstock.


Scion donor F2 citrange plant.


Scion severed from donor.


Epidermis shaved off of scion side 1.


Epidermis shaved off of scion side 2.


Shallow downward cut on rootstock - avoid cutting into wood.


Scion ready for insertion. Leaf area has been reduced to 25-30% to reduce transpiration.


Scion fitted for insertion.


Graft wrapped with parafilm.


Completed graft showing flush of growth present at time of grafting.


An example of this type of graft after 18 days. This graft will be re-wrapped until healing is complete.


« Last Edit: August 31, 2019, 05:49:51 AM by kumin »

Kelley_GA8a

  • Member
  • ***
  • Posts: 81
    • Stockbridge, GA USA 8a
    • View Profile
Re: My favorite small diameter scion Citrus graft
« Reply #1 on: June 29, 2019, 08:25:46 AM »
Thanks for the photos, Kumin! Can you do multiple grafts on one rootstock? Did you cover the graft or just use the parafilm? I have several rootstock trees that are too large to cleft graft, so I was going to resort to t-bud grafts. I recently tried a few cleft grafts, leaving the top two leaves on and unwrapped. We’ll see what happens.





kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: My favorite small diameter scion Citrus graft
« Reply #2 on: June 29, 2019, 10:25:50 AM »
As the rootstock is initially not top pruned, the number of grafts is only limited by available stem height. I use parafilm alone when the temperatures are high enough to heal quickly. If the temperatures are cooler, I use a bit of white electrical tape to secure the parafilm, I don't like to use excessive electrical tape due to low stretch and remove it after several weeks.

Samu

  • Hero Member
  • *****
  • Posts: 722
    • North Tustin, So. California, Zone 10A
    • View Profile
Re: My favorite small diameter scion Citrus graft
« Reply #3 on: June 29, 2019, 12:11:00 PM »
Another creative way of grafting;
I would like to try this method, thanks for sharing, Kumin!
Sam

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Citrus graft
« Reply #4 on: June 29, 2019, 05:45:11 PM »
Kelley_GA8a, to more fully answer your question regarding wrapping the graft: If the humidity is low and it's hot and windy, I will run parafilm up and down the graft to cover the entire graft area. Presently, humidity is high and I allow the small leaflets to remain unwrapped. It's all a matter of keeping an eye on the leaflets and avoiding desiccation. Additional wrap can be added or removed as required. Leaflets turning black, or drying up is not a good sign.

Laaz

  • Hero Member
  • *****
  • Posts: 1142
    • Charleston, SC 9a
    • View Profile
    • Citrusgrowers forum
Re: Small diameter scion Citrus graft
« Reply #5 on: June 29, 2019, 05:52:50 PM »
You can also chip bud with high success on small diameter rootstock.

Bomand

  • Hero Member
  • *****
  • Posts: 564
    • LouisianaCFDFMY
    • View Profile
Re: Small diameter scion Citrus graft
« Reply #6 on: July 03, 2019, 08:51:26 PM »
I love to top work with small stock....like to use parafilm and a walmart veggie bag..very successful.

will2358

  • Member
  • ***
  • Posts: 225
    • USA, Peachtree City, GA, zone 8a
    • View Profile
Re: Small diameter scion Citrus graft
« Reply #7 on: July 11, 2019, 08:06:15 PM »
Is that the veneer graft?
My name is Cindy

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Citrus graft
« Reply #8 on: July 11, 2019, 09:00:21 PM »
Despite similarities, this graft doesn't cut into the underlying wood on either the scion or the rootstock, except for the very end point of the scion.. The objective is to have cambium touching cambium on both sides of the scion. The length of the epidermis removed is the same on both sides of the scion. For best results when forcing the buds, it's important that the scion buds aren't too immature.

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Citrus graft
« Reply #9 on: July 13, 2019, 06:02:02 PM »
2 examples of buds emerging as the bark flap grafts are progressing. Practically all the grafts are alive at this point, and will hopefully emerge, providing the buds on the scions are mature enough.




« Last Edit: July 13, 2019, 07:55:29 PM by kumin »

sc4001992

  • Hero Member
  • *****
  • Posts: 3900
    • USA, CA, Fullerton
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #10 on: July 14, 2019, 06:24:05 AM »
Kumin, excellent illustrations and explanation.
Thank you.

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #11 on: July 14, 2019, 09:31:47 AM »
If the internodes are long enough it's possible to get one graft per bud from the scionwood.

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #12 on: August 02, 2019, 07:40:14 AM »
The thought process that went into this graft/budding process is that a flap of bark loosened from the stem will heal back to the stem if immediately securely fastened to the stem. By inserting a thin scion with the cambium exposed on both sides, it will also be included in the healing tissues. When I initially started Citrus breeding decades ago, it was my only method of graftage.
« Last Edit: August 02, 2019, 03:52:46 PM by kumin »

sc4001992

  • Hero Member
  • *****
  • Posts: 3900
    • USA, CA, Fullerton
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #13 on: August 02, 2019, 08:06:11 AM »
Your method works very good on these small scions.
Very helpful information.
« Last Edit: August 29, 2019, 02:12:43 PM by sc4001992 »

Florian

  • Sr. Member
  • ****
  • Posts: 294
    • Solothurn, Switzerland.
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #14 on: August 03, 2019, 12:14:00 PM »
Thanks for this excellent tutorial! I shall try this method too.

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #15 on: August 29, 2019, 11:44:23 AM »
Follow up photos as these grafts have developed further. I'm pleased with most of the scions' growth. Next concern is getting the new growth to harden off for winter. The grafts made lower on the Poncirus rootstock appear to have grown more than the grafts placed higher. I don't know if this is only a temporary response or not.






« Last Edit: August 29, 2019, 12:27:17 PM by kumin »

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #16 on: July 07, 2020, 06:08:28 PM »
I've just completed 440 of these grafts. Percentage of successful takes might be off a bit due to hot weather. Hot, humid weather is preferable to hot dry weather in this instance.

The rootstock is of smaller caliper than ideal, which slowed down the process.

Millet

  • Moderator
  • Hero Member
  • *****
  • Posts: 4798
    • Colorado
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #17 on: July 07, 2020, 08:16:47 PM »
Looks like a easier graft for new beginners at grafting.  Good usable information, and with good pictures.

Seanny

  • Hero Member
  • *****
  • Posts: 1119
    • Garden Grove, Orange County, California, 10B
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #18 on: July 08, 2020, 12:03:46 AM »
I tried this on an old branch, among 2 T-budding.
Ended up with 1 good T-budding.


kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #19 on: July 15, 2020, 09:38:20 PM »
This summer I've started using a variant graft. A problem with the bark flap graft is keeping all 3 layers properly aligned during the parafilm wrapping procedure. There's a tendency for one or two of the layers to shift to the side during wrapping.

The change is cutting the slipping bark on the rootstock in the shape of an inverted "L". That's a vertical incision as in a "T" bud, but the top horizontal cut only goes in one direction, but farther, hence inverted"L". A very flat and slender scion has the epidermis and a sliver of cambium removed from each of the 2 sides (just as previously). The knife used must be very sharp to provide smooth edges.

The prepared scion is inserted and pushed firmly under the bark flap, with the scion bud sticking out of the top of the horizontal cut, if desired. Wrapping should be from the attached side to the open cut to securely hold the scion within the bark.

I find I'm able to complete these grafts faster and have a more stable finished graft.

Within 3 weeks the success rate of this graft should be able to be evaluated.

Prepared scion, cambium exposed on both sides.



Inverted  "L" cut in rootstock bark -don't cut into wood.


Scion tucked securely to the left side - awaiting wrapping.


Graft wrapping - note the rotation - from the attached side toward the cut side on the rootstock.

« Last Edit: July 18, 2020, 05:03:49 AM by kumin »

Seanny

  • Hero Member
  • *****
  • Posts: 1119
    • Garden Grove, Orange County, California, 10B
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #20 on: July 16, 2020, 10:50:43 AM »
Your graft is in a GH so no scion protection?

kumin

  • Hero Member
  • *****
  • Posts: 709
    • USA PA 6b
    • View Profile
Re: Small diameter scion Bark Flap Citrus graft
« Reply #21 on: July 16, 2020, 01:01:30 PM »
This graft is on an outdoor propagation bed.  The bed was covered when used for Citrus germination. It hasn't been heated, nor covered this season. I have an additional high tunnel, covered, but unheated. My cold hardy Citrus hybrids should need little, if any winter protection in a normal winter. The high tunnel is being used in an attempt to hasten maturity from seedling to mature, fruiting phase.

However, in the event of an extreme Arctic blast, it affords me the option to use emergency heat.





In regards to scion protection, it might be prudent in sunny, hot conditions, but I haven't done any misting, shading, etc. I bud/graft several hundred trees per year and pretty much let them fend for themselves, except for watering, weeding, removing suckers, and fertilizing.
« Last Edit: July 16, 2020, 04:31:07 PM by kumin »